DIY 2.4MHz Ultrasonic Fog Generator on transistor 2SC2562

Ultrasonic fog generator, which allows you to turn water into fog.It is made on a 2SC2562 transistor and a 2.4MHz piezoelectric element

I bought the piezoelectric element on Aliexpress, its price is about 2 US dollars.Diameter 20 mm

Here are the characteristics of the transistor 2sc2562.Other transistors with similar characteristics can also be used, it will only be necessary to select a capacitor C2 according to the maximum generation power.

The piezoelectric element on the contact side must be isolated from water, otherwise water will get on the contacts and electrolysis will begin

With a power supply of 30 Volts, the current consumption will be 600 mA.The transistor will heat up and it must be installed on the heat sink

The piezoelectric element will have a signal in the form of a sine wave with an amplitude of about 25 volts

Subscribe
Notify of
guest
0 комментариев
Inline Feedbacks
View all comments