• High-performance RISC CPU
• Only 35 single-word instructions to learn
– All single-cycle instructions except for
program branches which are two-cycle
• Operating speed: DC – 20 MHz clock input
DC – 200 ns instruction cycle
• Interrupt capability
(up to 7 internal/external interrupt sources)
• 8-level deep hardware stack
• Direct, Indirect and Relative Addressing modes
• Power-on Reset (POR)
• Power-up Timer (PWRT) and
Oscillator Start-up Timer (OST)
• Watchdog Timer (WDT) with its own on-chip RC
oscillator for reliable operation
• Dual level Brown-out Reset circuitry
– 2.5 VBOR (Typical)
– 4.0 VBOR (Typical)
• Programmable code protection
• Power-Saving Sleep mode
• Selectable oscillator options
• Fully static design
• In-Circuit Serial Programming™ (ICSP™)
• Timer1: 16-bit timer/counter with prescaler
can be incremented during Sleep via external
crystal/clock
• Timer2: 8-bit timer/counter with 8-bit period
register, prescaler and postscaler
• Enhanced Capture, Compare, PWM module:
– Capture is 16-bit, max. resolution is 12.5 ns
– Compare is 16-bit, max. resolution is 200 ns
– PWM maximum resolution is 10-bit
– Enhanced PWM:
– Single, Half-Bridge and Full-Bridge modes
– Digitally programmable dead-band delay
– Auto-shutdown/restart
• 8-bit multi-channel Analog-to-Digital Converter
• 13 I/O pins with individual direction control
• Programmable weak pull-ups on PORTB
Device Memory I/O 8-bit A/D
(ch) Timers 8/16 PWM
(outputs) VDD RangeFlash Data
PIC16F716 2048 x 14 128 x 8 13 4 2/1 1/2/4 2.0V-5.5V
8-bit Flash-based Microcontroller with A/D Controller and
Enhanced Capture/Compare PWMartem kositsyn83
