In the review, there are current pliers with the BSIDE U6 multimeter function.With this tool, you will be able to measure AC and DC current in a contactless way, measure temperature contactlessly and find hidden wiring in the wall.Using the contact method, you can measure DC and AC voltage, resistance,continuity , check diodes and capacitors, and find the phase in the network.There is also a VFC function for filtering AC voltage and a flashlight.Here are its characteristics:
Color LCD display clamp amp meter
Open jaw digital multimeter tester
Electrical tester with smart mode for easy to use
Professional clamp ammeter with infrared thermometer design
Measure DC and AC current, VFC, capacitance, diode, environmental temperature
Measures AC and DC voltage, resistance, frequency, continuity, v-alert, live wire check
Also can be used as a professional voltage detector with adjustable sensitivity
Auto range, Auto power off, low battery indication with flashlight
Specifications:
Display: 9999 counts
DC current: 1-600A 0.1A ±(2.5%+5 counts)
AC current: 1-600A (AC mode, 40-200 Hz) 0.1A ±(2.5%+5 counts); 1-600A (VFC mode, 40-200 Hz) 0.1A ±(4.0%+5counts)
DC voltage: 0-620V (DC mode) 0.001 V ±(0.8%+3 counts); 0.5-620V (Auto Mode) 0.001 V ±(0.8%+3 counts)
AC voltage: 0-620V (AC mode) 0.001 V ±(1.2%+5 counts); 0.8-620V (Auto Mode) 0.001 V ±(1.2%+5 counts); 0-620 V (VFC mode) 0.1V ±(4.0%+3 counts)
Resistance: 0-10MΩ 0.1Ω ±(1.2%+3 counts)
Capacitance: 0.5µF-1000µF 0.1µF ±(3.5%+8 counts); 1000µF-10mF 0.1µF ±(4.5%+10 counts) Frequency: 10-1000Hz 1Hz ±(2.0%+10 counts)
Infrared temperature: -20℃~0℃/-4℉-32℉ 0.1℃/0.1℉ ±(3.0%+2℃/℉); 0℃~400℃/32℉-752℉ 0.1℃/0.1℉ ±(2.5%+3℃/℉)
Diode: Measure diodes within 2.0V
Continuity: If the resistance is less than 30Ω, the continuity beeper sounds
Temperature: 0-50℃/32℉-122℉ ±2℃/℉
V-Alert (non contact voltage detection): Yes
Live wire check: Yes
Power: rechargeable battery x 2 (built-in)
Size: 210 x 63.7 x 33 mm
Weight: 216 g
Package Includes:
1 x Digital Clamp Meter
1 x Test Leads
1 x Charging Cable
1 x Carrying Case
1 x Screwdriver
1 x Batteries
1 x User Manual
In my kit there is a strong case for the tool, a charging cable (charging at 5 Volts) and instructions
When you turn on the device, the automatic measurement function appears.This function includes DC and AC voltage measurement, ohmmeter and continuite.On the display you can observe the temperature inside the device.The device will automatically turn off after a certain time.To disable this function, briefly press the on/off button.
Press the SEL/AUTO button and exit the automatic mode.You will immediately switch to the mode of contactless phase search or hidden wiring.Insert a screwdriver into the socket, it will emit an electromagnetic signal,if there is a phase, the device will notify about it with a sound and an inscription.
In the same mode, you will be able to find hidden wiring in the wall, but only if the wiring is energized
By pressing the SEL/AUTO button, you will enter the “LIVE” mode.In this mode, you will be able to find the phase in the socket using the contact method.
Next comes the function of checking the capacitance of capacitors.The ESR value of the capacitor will not be displayed.The device will measure the capacity of 2200 uF in about 5 seconds.Almost instantly measures the capacity of 68 uF. Discharge the capacitor before measuring
Checks the circuit(continuity) fairly quickly, with almost no delays
Checking the resistance of the resistor
DC voltage
AC voltage
Press the VFC button and the AC voltage will be filtered out from various interference and the voltmeter readings will be more accurate
The radiation of the infrared thermometer comes out of this hole.Do not cover it when measuring the temperature.
When measuring the current, push one wire into the clamp and press the “A” button.As you can see, it shows a constant current accurately enough, but it will not show in tens of milliamps.
It is possible to measure the current in a non-contact way and at the same time to measure the voltage in a contact way
The device is powered by two NIMH batteries with a capacity of 800 mA.But you can also supply other batteries with a larger capacity.The red LED will light up during charging.
