W25Q16BV-16Mbit serial flash memory with dual and quad spi.

• Family of SpiFlash Memories
– W25Q16BV: 16M-bit / 2M-byte (2,097,152) – 256-bytes per programmable page
• Standard, Dual or Quad SPI
– Standard SPI: CLK, /CS, DI, DO, /WP, /Hold – Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
• Highest Performance Serial Flash
– Up to 8X that of ordinary Serial Flash – 104MHz clock operation – 208MHz equivalent Dual SPI – 416MHz equivalent Quad SPI – 50MB/S continuous data transfer rate
• Efficient “Continuous Read Mode”
– Low Instruction overhead – As few as 8 clocks to address memory – Allows true XIP (execute in place) operation – Outperforms X16 Parallel Flash

• Low Power, Wide Temperature Range
– Single 2.7 to 3.6V supply – 4mA active current, <1μA Power-down (typ.) – -40°C to +85°C operating range
• Flexible Architecture with 4KB sectors
– Uniform Sector Erase (4K-bytes) – Block Erase (32K and 64K-bytes) – Program one to 256 bytes – More than 100,000 erase/write cycles – More than 20-year data retention
• Advanced Security Features
– Software and Hardware Write-Protect – Top or Bottom, Sector or Block selection – Lock-Down and OTP protection(1) – 64-Bit Unique ID for each device
• Space Efficient Packaging
– 8-pin SOIC 150(2)/208-mil – 8-pad WSON 6×5-mm – 8-pin PDIP 300-mil(2) – 16-pin SOIC 300-mil(2)
– Contact Winbond for KGD and other options